Tiny Tail mini V2 Carbon Fiber – 14″ Wingspan Slingshot Free Flight Glider

IN STOCK *limited kits available Select from drop down menu for more options

Tiny Tail V2 – USA $33.00 USD2x Tiny Tail V2 – USA $56.00 USDTiny Tail V2 – International $42.00 USD2x Tiny Tail V2- International $75.00 USD

Tissue Color

BlackWhite

Master The Release – The state of being freed with that perfect magical lengthy glide

Translating nature’s strategies into design

Specially designed wings and wingtips of the TinyTail Mini allow slight angle to the air current to maximize lift and counter the effects of gravity, the perfect aerodynamic flight response. TinyTail Mini offers an extreme wing area along with carefully designed reflexed wings and wingtips to increase the area of laminar flow on the wing surface and minimize drag for smooth and long extended glides.
Wing-washout is a twist built into the wing so that the wing tip is at a lower angle of attack than the wing root in return creating that perfect laminar flow and avoiding wingtip stalls.

TinyTail Mini as the name suggests, has a very small lightweight and aerodynamic tail design reducing drag for optimal glide ratio. With a gentle push throw, the TinyTail has the ability to glide effortlessly for many many yards. With the included rubber band bungee launcher, the Tiny Tail mini can travel an entire football field and with a proper trim, return back to you.

It is easy to assume that building model airplanes is a difficult task but, in reality model airplanes are fairly simple to build especially with our step-by-step video build guide. Building requires just a few simple materials ( sand paper, glue, pliers and penitence ),  and if you give it a few hours you could become an expert at building hand launch or RC airplanes.

If you are new to building model aircraft, the TinyTail Mini is the perfect entry level model to get you started on your building journey. An exceptionally simple design  anyone can follow, build and fly. Build two or more TinyTail mini’s and compete with your friends or your kids to see who can stay up the longest, who can travel the furthest. Spend hours at the park launching your TinyTail into the open sky, a true joy to watch this little bird glide effortlessly with a single launch.

You are the controller ( pilot ), how much you pull the catapult rubber band will determine how long and far your TTM will travel. You may even hand launch your TTM in your backyard to experience that perfect beautiful glide.

Boomerang Effect

With just the right precession pull/release of your sling shot, your Tiny Tail mini creates a perfect 360 knife-edge loop that gracefully return back to you. A gratifying feeling as you turn around to the gracious round of applause from all the people who were watching you in awe.

10% discount if you purchase 2 Tiny Tail Mini gliders + save on shipping.

 Tiny Tail Mini Flight Footage

Your Tiny Tail Mini comes with a step by step HD video build guide, providing simple and easy way to learn and follow directions building your model from start to finish.

Specifications:

Weight: 8.4 – 10.5 grams
Wingspan: 14 inches (355mm)
Wing area: 28 in²
Control : free flight – Rubber Band launch
Assembly : Age 14+ up – Easy ( step by step HD video build guide )
Skill Level : Hobby Enthusiasts
Wind Cond : 0-5mph

Tools needed

1. Thin CA glue Click here for reference
2. painters tape Click here for reference
3. sand paper ( any grit )
4. scissors
5. Xacto blade ( sharp with many tips to replace )
6. Heat iron (  optional for lamination covering ) Click here for reference
7. pliers
8. Ruler
9. Glue Stick
10. One free afternoon 🙂