RX42E-D Micro DSMx Receiver with Brushless motor ESC
RX42E-D is a DSMX/DSM2 compatible receiver for Spektrum Radio systems!
RX42E-D V2 series of receivers are upgraded from the old version(2016), smaller and more stable, It still provides 4 independent output ports and 1 integrated 5A/1S brushless ESC.
Small size: 18.5*12.0*6.5mm(not including antenna)
Super light: 1.2g(including antenna)
Pin Type is 1.0mm micro JST
Will fit Micro servos with 1mm JST plugs Click here for servo type
Supports brushless motor
With built-in 5A/1S brush ESC (Lock starting function)
Modified and perfected binding program (DSMX/2)
Does not support PPM output
As it is difficult to reach the binding button when the receiver has been installed inside the plane, we developed self-binding function, it works like this: The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing), then complete the binding operation according to your transmitter binding ma.
Start-Lock Function is the onboard brush ESC function from preventing brush motor from starting by mistake. It can protect the brush motor from starting even throttle stick not at the lowest position when the receiver is powered.
As soon as the receiver gets the signal and the throttle stick on your transmitter is at the lowest position for 2 seconds the first time, Start-Lock will be released then, the brush motor will run when the throttle stick is pushed.
How to solder battery lead to your micro receiver