BMS-M15V Blue Bird HV Servos Digital Magnetic Sensor Micro High Torque High Speed Metal Gear Coreless

The Blue Bird M15V is the new kid in town, say goodby to KST??  Perfect for sail planes, dlg gliders, 3d airplanes and more of your RC high end toys, these M15V servos are precise, very fast and offer an unbelievable torque of 7.5 kg-cm / 104.2 oz-in  on a 2s battery. These blue bird servos come in an all metal case and a magnetic sensor instead of the  traditional potentiometer where the pot over time wears out.

These Blue bird BMS-M15V servos are very quite unlike the competitive digital servos where the buzzing sound can get quite annoying. 


IN STOCK
International orders please choose from drop down menu



Applications
Priority for 3D EP Aircraft, F5J, F3K, F3P & DLG, HLG.

Electrical Specification (Function Of The Performance) 
Torque At 6.0V5.1 kg-cm / 70.8 oz-in
Torque At 7.4V6.4 kg-cm / 88.9 oz-in
Torque At 8.4V7.5 kg-cm / 104.2 oz-in
Speed At 6.0V0.14 sec / 60°
Speed At 7.4V0.11 sec / 60°
Speed At 8.4V0.10 sec / 60°

 

Protection Mechanism
Soft Start ProtectionSoft start to a neutral position.
Over Voltage ProtectionOver 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage ProtectionLower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor ProtectionStall in 5 sec, output torque goes down.
Temperature ProtectionOverheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.

 

Power Supply
Operating Voltage Range4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S HV Li-Poly / 2S Li-Fe)

 

Control Specification 
Control SystemDigital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency:Up to 333Hz / Neutral:1500us or 1520us
Dead Band Width0.001ms ( Default:1us)
Potentiometer (Variable Resistor)Magnetic Sensored 【Non – Contact】

 

Mechanical Specifications
Ball BearingDual Ball Bearings
GearAll Metal Gears
Outside CaseFull One-Piece Aluminum CNC Casing
MotorHigh-Premium Coreless Motor
Horn / Gear Spline25 Teeth ( Same as F-Type )

 

Physical Specifications
Dimension (mm)23.2 x 10 x 24.3 mm / 0.91 x 0.39 x 0.96 in
Weight (gram)12.0 ± 0.5 grams / 0.42 oz​ ( W/O Cable )
Product Picture / Dimension Sketch